Pages: [1]

Author Topic: Wide angle lens hood  (Read 1017 times)

0 Members and 1 Guest are viewing this topic.

Offline watebo

  • Member
  • **
  • Posts: 29
Wide angle lens hood
« on: May 26, 2017, 09:37:15 PM »
I have purchased two wide angle lens hoods from eBay and I get vignetting with my 18-55 kit lens at 18mm. Any suggestions?
Logged

Offline AScot

  • Administrator
  • Friend of DynaxDigital
  • ******
  • Posts: 6042
  • Gender: Male
Re: Wide angle lens hood
« Reply #1 on: May 26, 2017, 11:43:42 PM »
These third party lens hoods are not designed to work with specific lenses. If it is the rubber type you can easily cut a bit off the front of the cap to shorten it as the problem is simply that it is too long and is intruding into the cone of light being gathered by the lens. As the focal length increases, say to 22mm, the vignetting may go away, however the lens cap will no longer be so effective at increased focal lengths where fortunately it is less or no longer required.
Logged
Sony A7, A850, A77, A700 || Sony>> 70-300G, 28-75 f2.8 SAM, 16-80CZ, 50 f1.4, FE 28-70 OSS, FE 24-70CZ f4 OSS, LA-EA4 || Minolta>> 300 f4 G HS, 200 f2.8 G HS, 100 f2.8 (D) Macro, 50 f1.7, 28 f2.8, 28-135 f4-4.5, 70-210 f4, 500 f8 Reflex, TC x 1.4 HS, TC x 2 HS. || Sigma 21-35 f3.5-4.2. || Tamron SP 24-135.

Offline watebo

  • Member
  • **
  • Posts: 29
Re: Wide angle lens hood
« Reply #2 on: May 27, 2017, 12:21:08 AM »
Thanks for your reply. I have both a metal and collapsible type. I will try trimming the rubber one. The vignetting disappears at around 22 mm.
Logged

Offline watebo

  • Member
  • **
  • Posts: 29
Re: Wide angle lens hood
« Reply #3 on: May 28, 2017, 04:28:14 PM »
Quote from: AScot on May 26, 2017, 11:43:42 PM
These third party lens hoods are not designed to work with specific lenses. If it is the rubber type you can easily cut a bit off the front of the cap to shorten it as the problem is simply that it is too long and is intruding into the cone of light being gathered by the lens. As the focal length increases, say to 22mm, the vignetting may go away, however the lens cap will no longer be so effective at increased focal lengths where fortunately it is less or no longer required.
Logged

Offline watebo

  • Member
  • **
  • Posts: 29
Re: Wide angle lens hood
« Reply #4 on: May 28, 2017, 04:29:21 PM »
Thank you. I trimmed off a little and that has solved the problem.
Logged
Pages: [1]